The Town of Calamity, The D&RGW RR Warehouse Row and Historical Miniature Gaming
More Stuff
▼
Wednesday, October 30, 2024
Wednesday, October 23, 2024
Benchwork for Warehouse Row
Time to take the next big step in getting Warehouse Row up and running...benchwork! I made a trip to two different big box DIY stores in search of 1/2" plywood. Could not find anything. First they are now measuring everything in 1/32 of an inch probably due to some obscure truth in advertising law. If I wanted something close to 3/4" I would need to find not 24/32 but 23/32 (of course on the website it says 3/4 but 23/32 in the fine print). That 1/2 should, in theory, be 15/32. Two stores and not a single sheet of 1/2 to be found and I deemed the 3/8' just a bit to flimsy for this (I might end up going back to this though). Not to mention that the prices are truly astronomical at this point.
At this juncture I figured it was time to dust of the rigid foam concept off and see if it would work. I bought two sheets of 1"x4'x8' blue foam and a sheet of 1/4"x4'x8' hardboard. I started with the hardboard and cut it down into rough sizes with a circular saw. Hardboard dust is the worst so I cut it outside rather than in the shop.
And here are the four rough cut pieces all ready for the next phase. |