Wargames and Railroads: New Modeling Material

As Dan August suggested and Lasgunpacker correctly identified I managed to get my hands on a sample for foamed PVC. This is definitely an interesting material and after a little internet searching I found a number of sites that recommend the material.

So that let to the search for US sources. Again I managed to find quite a bit in Europe before I finally found some US suppliers. This particular piece came from TAP Plastics and measures about 4" x 4" and 1/8" thick. Its relatively light (heavier than foam core and carvable foams like the blue and pink insulation foam or Damp's favorite green foam) and when I opened the box I admit to being a bit skeptical regardless of what I had found on the web. Still after messing around with it a bit it seems to be living up to its reputation as an excellent material for modeling. Its rigid, but has some flex to it so it should hold up fine to even rough game play. It accepts a pencil line so its easy to draw on. It can be scored easily and with the same tools I would use on wood. It can be embossed and cuts very easily, much easier than styrene. I suspect that it will dull blades pretty quickly though, so I better lay in a good stock of those. Superglue seems to be the best adhesive to hold things together.

The smallest thickness I can get from TAP Plastics is 1/8th" which is fine for use with the both exterior and interior walls. I found some thinner stock measuring 1mm and 2mm in thickness available through a couple of different sources so I can do some fancy inlay work if I want to. I can get 10 sheets of 1/8th thick foamed PVC measuring 11"x 17" for $30 plus $12 shipping. Its actually sign material so you can likely find scraps of it at sign printers as well or from discarded signs. That should appeal to the more frugal among you.

Here are some bad pictures: