ReaperCon Projects - Small Steps II

I had the opportunity to get a little more work in on the M4A1 last night. I started with the oil process to add more tones to the vehicle. This is simply add spots of oil colors and streaking them down the sides of the vehicle. If the streaks are to evident you simple keep streaking them down with the mineral spirits. Its an interesting process but I made a huge mistake on the right side, and this shows the quality difference between the I-94 decals and the Company B decals. I accidentally drag a brush full of mineral spirits across the Company B star and it started to disintegrate, you can see the effects in the picture. The I-94 decal held up just fine, no ill effects.

Now I have some things to fix, as something is cockeyed with the paint on the left side. Not quite sure what I'm going to do about that but at this point I just need to continue forward.

The evening's paint selection

The initial streaking and the disintegrating Company B decal

To many green dots and to concentrated on the center and the driver's side

Ruined the star on the turret as well, both sides, but you can see how the streaking adds different tones to the surface

The palete at the end of the evening