Painting the Modelu HO Scale Transitional Era Crew Bundle - Part 2

I started things off a little differently. Normally I just move straight to the skin tones but this time I decided to start out with a wash over the entire figure. Some of the detail is subtle enough that I needed something to make things pop a bit. For this I used Walnut Brown (9136) from Reaper Miniatures. I thinned this down to a wash consistency. I used Vallejo Airbrush Thinner for this instead of plain water. 

I then painted each of the five figures with the wash and let them dry.

Time for the skin. My normal process is to paint all of the skin tones first, on these figures that's just the face. I painted all of the skin with three paints from Ammo by Mig. The first layer was Burnt Red Brown (A.MIG-0134) I thinned this down a bit, regular water this time, I didn't want the paint to be to thick. The second layer was with Red Leather (A.MIG-0133) again from Ammo by Mig, I applied this over most of the face trying to make sure the deeper areas weren't covered like under the brim of the hat.  My final color was Burnt Sand (A.MIG-0118),  thinned with water, I mostly, gently, dry brushed this straight down from the top of the head, catching just the higher areas to make everything pop a bit. Everything tends to look a little rough at this stage so I made a glaze of Burnt Red Brown and applied it on the entire face to help blend the colors together. A glaze is thinner than a wash and I used airbrush thinner rather than water for it.

I think I deleted a picture here, but at least two of them have the shadow skin color applied

Now the second layer, this is essentially the base skin color.

And then a combined step. The drybrush with the highlight skin tone with the shadow glaze,

With all of that done its time to sit back and ponder what colors I want to use on the rest of the clothing.