Painting the Modelu HO Scale Transitional Era Crew Bundle - Part 8 Finishing Up

Time to wrap this up. These are relatively simple figures from a painting perspective. After the overalls, jackets and caps its just down to gloves, boots and touching up the skin a bit.

To start off I wanted to try something to try and bring out the features on the skin a bit more. I took some Army Painter Strong Tone and thinned it down about 50:50 with their glazing thinner. I painted all of the skin and the shirt with this mix and let it dry. It feels like it added quite a bit of depth to the face and filled in the eyes better than my initial effort, however, my highest highlight was really emphasized and looked very odd at this point. Didn't work as I had hoped on the shirt though, I think the detail is just to fine there to really take advantage of this technique. It also dried pretty glossy, but I expected that.

I went in with my mid-tone skin color. Ammo's Burnt Sand (A.MIG-0133), touched up the skin a bit which covered most of the gloss and tightened up the transition to that highest highlight.

From there I moved on to the gloves and boots, following pretty much the same process as the jackets and overalls; a dark, a mid-tone and a highlight. These areas are small and don't need those transitional 50:50 mixes that I used on the larger areas. I went with brown for the boots and dark grey for the gloves. I'm not quite sure what would have been a common color for railroad workers' gloves in the 50's so I went neutral.

Next its time to add some "nature" (a phrase we use when our Great Pyr brings in an assortment of leaves and twigs on her coat into the house). For me these will be diesel crews for warehouse row served by the Rio Grande. On to the dirt. I used two colors from my Pan Pastel stash, one dark and one light.

Since it is powder I might continue to play around with this, but for now I’ll call them done.