Jigsaw Puzzle - Mistakes!

I have been working on my jigsaw puzzle cutting skills. There is an idea in the back of my mind that this could be my retirement "job". We will see if that comes about, retirement is starting to creep up on the horizon though.

From Oct - Nov 2022 I cut 9 puzzles. I consider two of those to be prototypes and I put out for people to put together. Seven of those were family gifts. This year we have expanded things a bit. I'm cutting 14 puzzles this year, including two that are 11x14 rather than the 8x10s I have been doing. One of those I made a mistake on and I don't feel right giving it out as a gift so it will become another display puzzle,

I start with a picture and a piece of 5 ply baltic birch plywood I then use a dry mount press to mount them together. We purchased a smaller used press last year and it works okay. This year I used it on the first two puzzles and I just wasn't getting a good bond. Out of frustration I went looking for another used one that was in better shape and I found one on eBay that was local and we could pick it up. These presses are heavy and I really didn't want to try and have it shipped. This one is a bit bigger and worked like a charm. However, there was a bit of learning curve with it. I used the same settings and timing I used on the original press and that didn't really end well.

This is what happens when you apply to much heat for to long a period of time:

I think this particular image is cursed. This is the same image that I messed up a cut bad enough to tear it and thus making it only good for a display puzzle to put together on the table.