Sledgehammer Project; Preparation Pt XVIII - BFG Sub Component Assembly

Trying to move forward from the rather disastrous UE build I pulled out the Sledgehammer BFG itself and resolved to at least get the sub assemblies together so I could start planning how the extra detail parts are going to be added.

I took a bunch of assembly shots figuring that it might help others that are working on this little beauty at some point. First thing to remember is that I did a lot of filing and filling before this. Since some of the filling required is for gaps and injection marks that are very visible I would really recommend going through the filing/filling exercise before you begin any of the assembly.

Starting with the gun carriage, this is pretty straight forward.

glued up and ready to go.

I have opted to go with the tracks from Victoria Miniatures, rather than the kit supplied wheels. Again these are pretty straight forward and are conveniently labeled left and right on the back side.

Some cleanup is required. The mold line goes right down the middle of the tracks.

And of course on the bottom you will have to deal with the resin blocks.

Ran into some issues with the left tread.  Look at the bottom enter and you can see a whole link looks like its missing. This casting is probably bad enough that I could get a replacement, but I'm not going to bother with that, especially since I have had the tracks for at least 4 months now. Remember to check your resin parts right away in case this happens to you.

From the bottom, its evident that this is definitely a  miscast, the mold was filled enough or may have slipped slightly during the casting process.

The ladder attached quite nicely, although I did have to shorten the locater pins on the ladder a bit.

The tracks all ready the extra detailing that will come later.

Back to the carriage the wheel/track axel. This is a single piece and because the pins for the wheels and/or tracks are so evenly spaced its easy to put on backwards. The center axle mounts into the tabs underneath the carriage, the other axle goes to the front of the carriage.

Like this (looking from the bottom where the tabs are located)

This is how it looks from the top

In theory, all of this should just slip together now. Remember when you need to glue the tracks in place you will have to use super glue. The tracks are resin the gun carriage is, essentially, polystyrene (which means you should be using plastic model glue, not super glue for most of the construction).

Whew, it all fits together quite nicely. Note that I have not glued the tracks on at this point.

So directly above the axles is this stupid little gear, it drops into place and then that large plate is glue over it. It spins very nicely. In the context of the model its completely useless, so don't worry about getting glue on it, no one will ever know. In real life its part of the gun elevation system.

Here I'm starting on the barrel assembly

The hydraulics to the recoil. Note that the end cap needs a fair amount of filing and filling and its very visible on top of the gun.

Getting it together, its a very large gun

Putting together the breech block. the first piece is already glued in place to the barrel. The breech block needs to be attached to the door and since I'm going to have the door open, I'll need to fill in that very large hole in it.

The front side of the breech block. I may scrape off the molded on handle, its very soft looking.

I think these would be counterweights and what others have called "the Fin" for lack of a better term (and I'm sure there is one) I'll go with that. You will note that the curve on the Fin is smooth if this was a real artillery piece this would be geared, its part of the gun elevation system and would engage with the small gear from a couple of steps ago. I'll be modifing this piece to have a geared edge so that it at least looks right, although you may not be able to see it when the build is done.

Getting ready to do a little gluing. At this point just the counterweights since I need to work on the Fin.

These are the cable reels with cable molded on. 

And the reels glued in place.

The components for the crane

You can glue this piece but I didn't. I wanted a little bit of swing to it since the diorama will feature the gun being loaded.

All glued up.

The upper piece for the shell carrier is glued to the the ring. I have not glued the base plate on yet, I'm not sure what position I will need to have it in so I can make it swivel appropriately.

Mounting up the gun. Again, this has not been glued into place yet as it will be receiving a bit of extra detail.

Test fitting the platforms. Again no glue, my intent is to use the supports underneath the three planks and replace it with a metal walkway on both sides.

A first look at the whole thing

Adding a few of the crew

This is what I have left to deal with. I won't be using the two plates in the lower right side of the picture.

Still a long way to go at this point.

Acquisitions - Expanding the PzKfw III Library, Military Modelling Book

I have acquired another book for the PzKfw III Library titled "Military Modelling Book Panzerkampfwagen III Ausf. J-N. Its published (I think) by Shinkigensha Co Ltd. Printed in 2011 it apparently is long since out of print as I found numerous copies being sold for $85 plus. I found this one for $35 plus shipping. I think that is close to the original publication price but in any event it was a price I was willing to pay. There is a second book (well actually the first book) for the Ausf. A-H. This is a pure modelling book and features builds of various kits that were available in 2011. It has great pictures of the models from a wide variety of angles and close ups but all of the captions are in Japanese. While I can glean quite a bit from the pictures of what is being done it would be nice to be able to read the captions. In the back is a short section with a lot of close ups of actually Pz IIIs although I probably have most of that in other books already. There are some nice line drawings in the back as well, those are quite nice but again I have access to a lot of line drawings at this point! From a modelling standpoint is a pretty good book and one I'm likely to actually use. Being written completely in Japanese certainly limits its usefulness to me. I would like to acquire the first book at some point but only at a reasonable price, something significantly less than $85.

It is a large format book with a fairly stiff cover and it actually has a dust jacket as well. The little purple/pink band at the bottom is an advertising slip that can be removed. Again marvelous pictures but not particularly useful beyond a modelling reference and limited due to language.

Sledgehammer Project; Preparation Pt XVII - The Renault UE Build Continues

I, basically, finished the build of the Renault UE which consisted of finally getting the tracks completed. Quite frankly it took to long, was incredibly frustrating and despite my best efforts look really bad. I might take a look to see if there are some aftermarket tracks available for it but I really doubt there are. The tracks pretty much preclude including this model on the diorama, they just aren't going to pass muster.

Instead of flexible tracks its made up of 17 different pieces that just don't quite wrap around the drive and idler wheels nicely.

I'm not sure why the pieces on this side went on better than the ones on the other side (shown below)

The back is just a disaster.

This side is better, overall, but still quite ugly

Clue - Supernatural Edition

I was quite surprised to see this one sitting on a retailer's shelf so I had to pick it up. I paid full retail on this one but since its going for at least double that on eBay I felt it was a decent buy. I also spotted copies of Clue - Zelda and Clue - The Walking Dead in the same store, I'll be going back at some point to acquire those.

This is one of those editions that's price is driven by the incredible popularity of the TV show. I watched the first couple of seasons and I have been surprised at the longevity of the show. It was only a matter of time before it ended up as a Clue game.

I have decided to name the variants of the game, just to make it easier. Supernatural is what I will now refer to as Clue Game Variant 1.

Variant 1 adds a second deck of cards, typically called the Intrigue deck. You acquire an Intrigue Card either rolling a question mark on one of the dice, or by landing on a question mark on the board, or being moved to another location as part of a "rumor". Each card allows some kind of action to be taken by the player. Also in the deck are 8 cards, for Supernatural they are Demon Cards (In Star Wars I believe they are Stormtroopers, I will have to check), they are simply put to the one side, but keep track of them! When the 8th card is drawn the game ends. It adds an interesting little time element to the game.

In addition, each character in the game has a power that they can use once in the game.

Let's take a look at Clue Supernatural:

Instead of nice tokens, this version comes with cardboard pieces and plastic bases for them

The weapons, however, are very cool,

The Intrigue Cards

Character Cards, I would recommend shuffling them and dealing each player a character.

The card backs. I'm not sure about the cards on the right. There are two of them and both sides are printed with the wood planks.

A look at the collection