Warehouse Row - Building #1 - Buttresses rail side

Still working through an assembly order in my head and still trying to move forward with the building. I decided that it would be safe to go ahead and see how the buttresses would go together. These are the wider pair on the rail side of the building. Pretty simply really, just apply glue to the substructure and hope that the paper adheres properly. Things, so far, are working like a charm. After I let the glue dry overnight I folded the edge to see if it would appear sharp and it did! Then I applied glue along the edge, applied clamps and I'm back to waiting for glue to set.

Just a quick look from the back. Glue has been applied and I'll trim the excess off later.

Flipped over to show off the brick.

And the clamping begins.

Looking good at this point, except for that stain where I laid the glue on to heavy. Some lessons are hard to learn.