Quotes

Life is short, break the rules. Forgive quickly, kiss slowly. Love truly, laugh uncontrollably and never regret anything that makes you smile. - Samuel Longhorne Clemens (Mark Twain)

Wednesday, April 19, 2017

World War II Project - Terrain - Buildings

As can be seen from previous posts I'm currently focused on the WWII project. I have no idea how long that will last as I also managed to order some more western miniatures from Knuckleduster and Brigade Games, and there is a Black Scorpion Kickstarter out there for their Tombstone game. In the meantime I remain distracted with WWII. Since I have no buildings I decided that I would need something a little bit more modern and European than my collection of western stuff.

I spent a lot of time going over websites and trying to decide what I wanted. I made lists and agonized over each selection for this project. I wanted a good sized town plus some more rural buildings for a farm like setting. Of course nobody has all of that covered or at least not with buildings that I wanted to make. I ended up with orders going to Charlie Foxtrot Models, Sarissa Precision and Sally 4th. The Sally 4th buildings intrigued me because of the use of the photo realistic paper to cover the outside. This is not a unique idea by any means, model railroaders have been doing it for years. It is a quick way to get a very good looking building on the table though and that's what I'm really after. I have "textures" for exterior brick and stone already from Clever Models which specialize in paper models.

I decided that I would apply the same concept to buildings from the other manufacturers. Charlie Foxtrot buildings were selected primarily because they have a nice solid look and feel to them and they have a very wide range of out buildings for the more rural settings including a nice stone barn. I bought two different houses from them along with barns, stables, tool sheds and those arrived over the weekend.

At the same time the order from Sarissa Precision arrived. This is more in town buildings, a railroad station, a church, a chateau and I decided to try some of their railroad stuff as well. Track for the railway station and a passenger car to go on the track. Nothing to elaborate, unlike Calamity's railroad (which still needs at least one 2-8-0 locomotive).

The buildings from Sally 4th have shipped but its hard to say how long that will take from the UK via courier.

So here is what the first three boxes yielded:
First up is are the buildings from Charlie Foxtrot Models
The houses. Note that all the kits from Charlie Foxtrot are already punched out of their sprues. The disadvantage to me is that I don't really know what is an actual part and what is just fallout from the windows and other openings.


I didn't actually order the Pigsty and Pen, I think they were just kind enough to toss that in the box for me.

Here is the contents of one of the two Dormer houses. Lots of pieces! The ones at the bottom of the picture, I think, are window and door cutouts.
The order from Sarissa Precision came in two boxes because of the different sizes of the buildings.


The larger Norman church, probably not appropriate for France but I like it, so I'm going to use it. As you can see from the packaging Sarissa Precision packs their kits still on the sprue or frame. I had some bad kits from Sarissa for some small houses that I was going to use for Calamity. The MDF they were using at the time wasn't always the same width which meant that sometimes tabs wouldn't fit into the designated slots. I'll dry fit all of these before gluing them together.

The Chateau and the Railway station. 

A look at the tracks and passenger car. I took a look at the tracks from the back and I'm not thrilled with them. I'll have to measure but I'm fairly certain that the rails are to far apart and the rails are definitely to "light" for mainline or even branchline operation.

2 comments:

  1. Lots of good stuff there Kris! Can't wait to see what you do with the Sarissa kits.
    I'd never seen a CFT kit in its bag, how strange to have everything pre-punched?! Wonder what the thought process is on that?

    ReplyDelete
    Replies
    1. I was a little surprised when I saw a bag full of parts too. I suppose it depends on how big a laser cutter he has and how the parts are arranged on the frame. On the other hand by doing it this way there are no little pieces to cut to free a part from the frame. I'm kind of betting on that one myself.
      I have some ideas on how to approach all of these kits to keep the process simply yet get some nice 3D effects from basically flat kits.

      Delete