Mount Blue Model Co - On30 22' Boxcar

I have been doing a lot of fanciful doodling with railroad plans roughly based on space, potentially, available in the family room. I found that I was suffering from some fairly serious grandiose designs. So I added a couple of parameters to make things actually fit in the space available. 

It has to be portable, best case I should be able to put it up, take it down and move it on my own. I decided I would use a 36"x 80". This means that my widest curve radius can only be 16" which is pretty darn tight. I know that all my On30 engines can be modified to run this tight a curve, although the 2-8-0s might look a little odd. All my current equipment is either 30' (freight cars) or 40' (passenger cars). I'm not sure how those are going to look on this sharp curve so I went looking for some of the shorter kits out there. Mount Blue Model Co has a nice boxcar kit that's 22' long so I ordered two to build and have them ready when I start to do some tests with the curvature.

I haven't built a freight car kit in years and this laser kit is very different from what I'm use to. It practically falls together and has more detail that those older kits I used to build.