Building Calamity 10 - Row House #2 - Exterior Paint

Some nights it feels like I just don't seem to accomplish anything. I spent a lot of time cleaning and re-cleaning the airbrush and really it still wasn't really working right by the end of the evening. Something is stuck somewhere but I can't figure out what it is, just not getting a good smooth air and paint flow from it. I have cleaned it and re-cleaned it and still nothing. Oh well I'll figure it out. It was working well enough to get this part of the work done.

I finished the floor and the exterior walls with the base coat. I'm hoping this will show up really well when I peel the top coat of paint away. It still needs to be sealed with a matte varnish before I can apply the chipping fluid, hopefully I can work that in tomorrow.

Airbrushed base coat for the exterior

Airbrushed interior floor

Adding some depth with Raw Umber ink

Building Calamity 9 - Row House #2 - Initial Progress

I made a lot of progress on different projects in November, I'm hoping that trend continues into December. I decided to start off with the second of the two Row Houses for Calamity. Again I'm not sure if these will make the final cut on to the board. They are larger than I had anticipated. But they are useful testbeds to try different building and finishing techniques on.

I originally cut the pieces for this house at the same time as I did for the first one. Of course that meant that I repeated the same mistake I made on the first one as far as the size of the openings I cut for the doors and windows. I was also vowed to stick to the order that's really necessary to avoid doing a lot of interior painting after its assembled. To make this one different I wanted to use wallpaper rather just bare planking so I left the interior side of the pieces smooth. The first thing I discovered was the paper I intended to use was just to thick so I had to scramble for an acceptable alternative, in this case some of the pages out one of my moleskin books. Its about the right color but its probably a little to thin. I'll have to drop by Michael's or Hobby Lobby and go through the scrap book sections again to find some suitable patterns or even just blank white paper that's the right thickness. I have a file of wall paper patterns but I'll have to be sure to scale them down a bit. Most patterns that I have seen used have a pattern that printed out to big. The patterns are scaled for dollhouses and a much smaller version of the pattern is necessary for my buildings or it will really dominate the walls. 

[Dollhouses are typically scaled out to 1/12 scale (1" equals a foot) so they should be reduced to about 25% of their actual size which really only gets us down to O Scale or 1/48.]

As I figure the owners aren't into frills this building gets plain wall paper on the walls. It ended up wrinkled in a couple of places and a few bubbles. Initially I tried to smooth these out and then I decided to leave it, it adds character and shows that the roof probably leaks as well. I might go in and add some streaks from water stains. Along with the wall paper I decided to add a chair rail all the way around as Doug suggested during the work on Row House #1. I wavered on adding an interior wall to make it into a two room house but decided against it. I think I will have plenty of opportunities to work with interior walls in future buildings.

I have completed the interior with; wallpaper, chair rail, baseboard trim and painting. I'm going to add some painter's tape over the openings and along the edges so that I don't get overspray  from the airbrush on the inside. Before I move forward with the exterior painting though I'm going to add the exterior trim and paint the front and backs of the doors and windows before I add them to the walls. I may go ahead and paint the exterior flat without the doors and windows and see how that goes.

I'm dry fitting what I have at this point. You can see that I have already trimmed out the big front window in this picture. My steel blocks are probably the best tool I have purchased for these builds.

Since the blocks are square I can use them as a straight edge. Here I'm using them to help get the chair rail in position and, hopefully, straight as well.

Looks like the chair rail lines up pretty good across at least three of the walls. After the glue had set I trimmed the excess off that crosses door and window openings.

I went ahead and painted the chair rail early on, it just made it easier to see and I didn't have to be to neat with the paint.

Here I have applied the wall paper using the chair rail as a guide. I should have let the glue set longer as the edges were pretty rough from the trimming. I wasn't to concerned though as I would have to removed the wallpaper from around the edges so I could glue the trim in place.

Here I have removed the wallpaper from around all the openings. It looks quite a bit neater at this stage.

Interior trim in place

Interior trim painted. Before I start work on the exterior I will give this a shot of  matte varnish to help protect the paint work on the trim.

The other thing that I toyed with today was the concept of lighting the town. A couple of friends thought that I could probably make a could portion of each kerosene lantern or lamp from beads, along with some thoughts on how to make that characteristic bulge in the glass. If I go forward with the lighting I'm likely to need upwards of 100 lamps for the project so they need to be relatively cheap and easy to build. I delved into the beading/jewelry world a bit, its a scary place.

Weathering - C&S #22

I needed something a little different to work on so I pulled my Bachmann 2-6-0 off the shelf to see what I could do with it. This is lettered for the Colorado & Southern and represents (more or less) engine #22. Now the timer period for Calamity actually precludes this engine existing but since its for game purposes rather than model railroading purposes I'm okay with that.

I really just wanted to experiment with this one a bit. While I like the weathering it seems to be to subtle to really show up well in the photos. It was also a pretty quick job so I didn't really take any WIP photos.

I found a shot I had taken of #22 sometime ago in pristine, out of the box, condition

Kind of mid stream. Basic black has been softened with grays, getting ready to add some dirt and a little rust

Finished, Fireman's side

Finished, Engineer's side

Building Calamity 8 - Row House Finishing

I pulled out the weathering implements to try and finish off this Row House for Calamity. I'm pretty pleased with the results at this point. Of course I didn't quite get it completely finished. The front door has gone missing and I broke out the center framing piece in the front window. But other than that I'm ready to call this one finished.

A few pictures from the workbench.

Gathering a few materials together. Pan Pastels in the little canisters on the left, the applicator handles and the sponges in the middles, some of paint and my Liquitex Ram Umber ink (don't leave home with out it).

First step was to apply a strong wash on the roof to help pick out the shingles. I followed that up with  streaks of a lighter red brown Pan Pastel pigment.

I used several colors of Pan Pastel pigments on the outside after I scrubbed paint off to reveal the wood underneath for that peeled paint look.

After applying the pigments I streaked white paint down the outside to provide a highlight. I'm thinking this one is looking pretty good. Will need to do a little repair work but its ready for the board when I get that far.

Care Package - 1st Corps

Woohoo! Another care package hit the mailbox today. This one should just about finish off what I need for my British Paratroopers. I'm not sure if the 1st Corps minis w illreally mix all that well with the Warlord Games Paratroopers, they are a bit chunkier but I think they will be fine once I have them painted and mounted the same way.

So some pictures of the care package to keep everyone occupied while I get out the brushes for the rest of the evening

I picked up some more flame throwers, sniper teams and bren gunners. The third section should have two bren guns instead of the usual one. I was looking for some different poses to get some variety on the table.

These air dropped containers are what I was really after. I'm very pleased with the detail on these. They will make excellent objective markers or even markers for jumping off points.

.